2013

Articles et actes de conférence publiés dans des revues

1. Abkarian M., Protière S., Aristoff J. M., and Stone H. A., Gravity-induced encapsulation of liquids by destabilization of granular rafts. Nature Communications, 2013. 4: p. 1895.

2. Adam O., Cazau D., Gandilhon N., Fabre B., Laitman J. T., and Reidenberg J. S., New acoustic model for humpback whale sound production. Applied Acoustics, 2013. 74(10): p. 1182–1190.

3. Adamowska M., Lauga V., and Da Costa P., Elaboration of an Accelerated Oven CNG Heavy Duty Vehicles Catalyst Ageing for Road Ageing Simulation (Proc. of the 9th International Congress on Catalysis and Automotive Pollution Control, Brussels, 2012). Topics in Catalysis, 2013. 56(1–8): p. 267–272.

4. Adouane D., Capela S., and Da Costa P., On the Efficiency of NH3-SCR Catalysts for Heavy Duty Vehicles Running on Compressed Natural Gas in Synthetic Gas Bench Scale (Proc. of the 9th International Congress on Catalysis and Automotive Pollution Control, Brussels, 2012). Topics in Catalysis, 2013. 56(1–8): p. 45–49.

5. Adouane D., Teixeira M., and Da Costa P., Influence of Catalyst Composition on NOX Trap Performances (Proc. of the 9th International Congress on Catalysis and Automotive Pollution Control, Brussels, 2012). Topics in Catalysis, 2013. 56(1–8): p. 261–266.

6. Afgan I., Benhamadouche S., Han X., Sagaut P., and Laurence D., Flow over a flat plate with uniform inlet and incident coherent gusts. Journal of Fluid Mechanics, 2013. 720: p. 457–485.

7. Agbaglah G., Josserand C., and Zaleski S., Longitudinal instability of a liquid rim. Physics of Fluids, 2013. 25(2): p. 022103.

8. Alaei M. H., Mahajan P., Brieu M., Kondo D., Rizvi S. J. A., Kumar S., and Bhatnaga N., Effect of particle size on thermomechanical properties of particulate polymer composite. Iranian Polymer Journal, 2013. 22(11): p. 853–863.

9. Albarazi A., Beaunier P., and Da Costa P., Hydrogen and syngas production by methane dry reforming on SBA-15 supported nickel catalysts: On the effect of promotion by Ce0.75Zr0.25O2 mixed oxide. International Journal of Hydrogen Energy, 2013. 38(1): p. 127–139.

10. Ambrosi D. and Ciarletta P., Plasticity in passive cell mechanics. International Journal of Non-Linear Mechanics, 2013. 56: p. 56–60.

11. Arnal B., Pinton G., Garapon P., Pernot M., Fink M., and Tanter M., Global approach for transient shear wave inversion based on the adjoint method: a comprehensive 2D simulation study. Physics in Medicine and Biology, 2013. 58(19): p. 6765–6778.

12. Ascaso S., Galvez M. E., Da Costa P., Moliner R., and Lazaro M. J., On the influence of the alumina precursor in Fe-K/Al2O3 structured catalysts for the simultaneous removal of soot and NOx: From surface properties to reaction mechanism. Comptes Rendus Chimie, 2013(Available online 17 September 2013, doi: 10.1016/j.crci.2013.08.001).

13. Assous F. and Chaskalovic J., A paraxial asymptotic model for the coupled Vlasov-Maxwel problem in electromagnetics. Journal of Computational and Applied Mathematics, 2013(Available online 27 December 2013).

14. Assous F. and Chaskalovic J., Indeterminate constants in numerical approximations of PDEs: A pilot study using data mining techniques. Journal of Computational and Applied Mathematics, 2013(Available online 22 December 2013).

15. Audoly B., Clauvelin N., Brun P.-T., Bergou M., Grinspun E., and Wardetzky M., A discrete geometric approach for simulating the dynamics of thin viscous threads. Journal of Computational Physics, 2013. 253: p. 18–49.

16. Balbi V. and Ciarletta P., Morpho-elasticity of intestinal villi. Journal of the Royal Society Interface, 2013. 10(82): p. 20130109.

17. Balika L., Focsa C., Gurlui S., Pellerin S., Pellerin N., Pagnon D., and Dudeck M., Laser ablation in a running hall effect thruster for space propulsion. Applied Physics A-Materials Science & Processing, 2013. 112(1): p. 123–127.

18. Baresch D., Thomas J.-L., and Marchiano R., Three-dimensional acoustic radiation force on an arbitrarily located elastic sphere. Journal of the Acoustical Society of America, 2013. 133(1): p. 25–36.

19. Baresch D., Thomas J.-L., and Marchiano R., Spherical vortex beams of high radial degree for enhanced single-beam tweezers. Journal of Applied Physics, 2013. 113(18): p. 184901.

20. Bartolomeu R., Bértolo R., Casale S., Fernandes A., Henriques C., Da Costa P., and Ribeiro F., Particular characteristics of silver species on Ag-exchanged LTL zeolite in K and H form. Microporous and Mesoporous Materials, 2013. 169: p. 137–147.

21. Bianco F., Chibbaro S., Vergni D., and Vulpiani A., Front speed in reactive compressible stirred media. Physical Review E, 2013. 87(4): p. 042924.

22. Bianco F., Chibbaro S., Vergni D., and Vulpiani A., Reaction spreading on percolating clusters. Physical Review E, 2013. 87(6): p. 062811.

23. Bokov P., Flaud P., Bensalah A., Fullana J.-M., and Rossi M., Implementing boundary conditions in simulations of arterial flows. Journal of Biomechanical Engineering-Transactions of the ASME, 2013. 135(11): p. 111004.

24. Bollache E., Kachenoura N., Frouin F., Redheuil A., Mousseaux E., and Lucor D., Numerical modeling of arterial pulse wave propagation to characterize aortic hemodynamic: Validation using magnetic resonance data. IRBM, 2013. 34(1): p. 86–89.

25. Brenner R. and Suquet P., Overall response of viscoelastic composites and polycrystals: exact asymptotic relations and approximate estimates. International Journal of Solids and Structures, 2013. 50(10): p. 1824–1838.

26. Bugrova A. I., Bishaev A. M., Desyatskov A. V., Kozintseva M. V., Lipatov A. S., and Dudeck M., Experimental Investigations of a Krypton Stationary Plasma Thruster. International Journal of Aerospace Engineering, 2013. 2013: p. 686132.

27. Camescasse B., Fernandes A., and Pouget J., Bistable buckled beam: Elastica modelling and analysis of static actuation. International Journal of Solids and Structures, 2013. 50(19): p. 2881–2893.

28. Cazau D., Adam O., Laitman J. T., and Reidenberg J. S., Understanding the intentional acoustic behavior of humpback whales: A production-based approach. Journal of the Acoustical Society of America, 2013. 134(3): p. 2268–2273.

29. Cenian A., Rachubinski H., Chernukho A., and Dudeck M., Plasma-wall interactions in DC discharges and sheath of Langmuir probes. European Physical Journal-Special Topics, 2013. 222(9): p. 2143–2156.

30. Chadefaux D., Le Carrou J.-L., and Fabre B., A model of harp plucking. Journal of the Acoustical Society of America, 2013. 133(4): p. 2444–2455.

31. Chadefaux D., Le Carrou J.-L., Wanderley M. M., Fabre B., and Daudet L., Gestural Strategies in the Harp Performance. Acta Acustica United with Acustica, 2013. 99(6): p. 986–996.

32. Chassaing J.-C., Khelladi S., and Nogueira X., Accuracy assessment of a high-order moving least squares finite volume method for compressible flows. Computers & Fluids, 2013. 71: p. 41–53.

33. Chassaing J.-C., Nogueira X., and Khelladi S., Moving Kriging reconstruction for high-order finite volume computation of compressible flows. Computer Methods in Applied Mechanics and Engineering, 2013. 253: p. 463–478.

34. Chomette B., Fernandes A., and Sinou J.-J., Cracks detection using active modal damping and piezoelectric components. Shock and Vibration, 2013. 20(4): p. 619–631.

35. Chraibi H., Petit J., Wunenburger R., and Delville J.-P., Excitation of fountain and entrainment instabilities at the interface between two viscous fluids using a beam of laser light. Physical Review Letters, 2013. 111(4): p. 044502.

36. Ciarletta P., Surface instability of a gel disc in swelling. European Physical Journal E, 2013. 36(2): p. 18.

37. Ciarletta P., Buckling Instability in Growing Tumor Spheroids. Physical Review Letters, 2013. 110(15): p. 158102.

38. Ciarletta P., Ambrosi D., Maugin G. A., and Preziosi L., Mechano-transduction in tumour growth modelling. European Physical Journal E, Soft matter, 2013. 36(3): p. 9836.

39. Ciarletta P., Destrade M., and Gower A. L., Shear instability in skin tissue. Quarterly Journal of Mechanics and Applied Mathematics, 2013. 66(2): p. 273–288.

40. Ciarletta P., Preziosi L., and Maugin G. A., Mechanobiology of interfacial growth. Journal of the Mechanics and Physics of Solids, 2013. 61(3): p. 852–872.

41. Combescure C., Dumontet H., and Voldoire F., Homogenised constitutive model coupling damage and debonding for reinforced concrete structures under cyclic solicitations. International Journal of Solids and Structures, 2013. 50(24): p. 3861–3874.

42. Dahiya D., Baskar S., and Coulouvrat F., Characteristic fast marching method for monotonically propagating fronts in a moving medium. SIAM Journal on Scientific Computing, 2013. 35(4): p. A1880–A1902.

43. Dartois S., Nadot-Martin C., Halm D., Dragon A., Fanget A., and Contesse G., Micromechanical modelling of damage evolution in highly filled particulate composites - Induced effects at different scales. International Journal of Damage Mechanics, 2013. 22(7): p. 927–966.

44. De Marinis D., Chibbaro S., Meldi M., and Sagaut P., Temperature dynamics in decaying isotropic turbulence with Joule heat production. Journal of Fluid Mechanics, 2013. 724: p. 425–449.

45. Delestre O. and Lagrée P.-Y., A 'well-balanced' finite volume scheme for blood flow simulation. International Journal for Numerical Methods in Fluids, 2013. 72(2): p. 177–205.

46. Delestre O., Lucas C., Ksinant P.-A., Darboux F., Laguerre C., Vo T.-N. T., James F., and Cordier S., SWASHES: a compilation of shallow water analytic solutions for hydraulic and environmental studies. International Journal for Numerical Methods in Fluids, 2013. 72(3): p. 269–300.

47. Demery V., Diffusion of a particle quadratically coupled to a thermally fluctuating field. Physical Review E, 2013. 87(5): p. 052105.

48. Desmorat B., Structural rigidity optimization with an initial design dependent stress field. Application to thermo-elastic stress loads. European Journal of Mechanics - A/Solids, 2013. 37: p. 150–159.

49. Dormieux L. and Kondo D., Non linear homogenization approach of strength of nanoporous materials with interface effects. International Journal of Engineering Science, 2013. 71: p. 102–110.

50. Doumenc F., Chénier E., Trouette B., Boeck T., Delcarte C., Guerrier B., and Rossi M., Free convection in drying binary mixtures: Solutal versus thermal instabilities. International Journal of Heat and Mass Transfer, 2013. 63: p. 336–350.

51. Druault P., Hekmati A., and Ricot D., Discrimination of acoustic and turbulent components from aeroacoustic wall pressure field. Journal of Sound and Vibration, 2013. 332(26): p. 7257–7278.

52. Druault P., Marchiano R., and Sagaut P., Localization of aeroacoustic sound sources in viscous flows by a time reversal method. Journal of Sound and Vibration, 2013. 332(15): p. 3655–3669.

53. Engelbrecht J., Givoli D., Hagstrom T., and Maugin G. A., Special issue on Advanced Modelling of Wave Propagation in Solids (Preface). Wave Motion, 2013. 50(7): p. 1061–1062.

54. Frey J., Chambon R., and Dascalu C., A two-scale poromechanical model for cohesive rocks. Acta Geotechnica, 2013. 8(2): p. 107–124.

55. Fritzen F., Forest S., Kondo D., and Boehlke T., Computational homogenization of porous materials of Green type. Computational Mechanics, 2013. 52(1): p. 121–134.

56. Fuster D., An energy preserving formulation for the simulation of multiphase turbulent flows. Journal of Computational Physics, 2013. 235: p. 114–128.

57. Fuster D., Matas J.-P., Marty S., Popinet S., Hoepffner J., Cartellier A., and Zaleski S., Instability regimes in the primary breakup region of planar coflowing sheets. Journal of Fluid Mechanics, 2013. 736: p. 150–176.

58. Galmiche G., Labat C., Mericskay M., Aissa K. A., Blanc J., Retailleau K., Bourhim M., Coletti D., Loufrani L., Gao-Li J., Feil R., Challande P., Henrion D., Decaux J.-F., Regnault V., Lacolley P., and Li ZL., Inactivation of Serum Response Factor Contributes To Decrease Vascular Muscular Tone and Arterial Stiffness in Mice. Circulation Research, 2013. 112(7): p. 1035–1045.

59. Gerolymos G. A., Filtered chorochronic interface as a capability for 3-D unsteady throughflow analysis of multistage turbomachinery. International Journal of Computational Fluid Dynamics, 2013. 27(2 SI): p. 100–117.

60. Gerolymos G. A., Sénéchal D., and Vallet I., Wall effects on pressure fluctuations in turbulent channel flow. Journal of Fluid Mechanics, 2013. 720: p. 15–65.

61. Ghadi F., Ruas V., and Wakrim M., Finite Element Solution of a Stream Function-Vorticity System and its Application to the Navier Stokes Equations. Applied Mathematics, 2013. 4(1A): p. 257–262.

62. Giunta G., Catapano A., and Belouettar S., Failure indentation analysis of composite sandwich plates via hierarchical models. Journal of Sandwich Structures & Materials, 2013. 15(1): p. 45–70.

63. Goidescu C., Welemane H., Kondo D., and Gruescu C., Microcracks closure effects in initially orthotropic materials. European Journal of Mechanics - A/Solids, 2013. 37: p. 172–184.

64. Guillamet R., Lagay N., Mocuta C., Lagrée P.-Y., Carbone G., and Décobert J., Micro-characterization and three dimensional modeling of very large waveguide arrays by selective area growth for photonic integrated circuits. Journal of Crystal Growth, 2013. 370: p. 128–132.

65. Hadjltaief H. B., Da Costa P., Galvez M. E., and Ben Zina M., Influence of Operational Parameters in the Heterogeneous Photo-Fenton Discoloration of Wastewaters in the Presence of an Iron-Pillared Clay. Industrial & Engineering Chemistry Research, 2013. 52(47): p. 16656–16665.

66. He Y., Zhang Y., and Xu H., Two-Level Newton's Method for Nonlinear Elliptic PDEs. Journal of Scientific Computing, 2013. 57(1): p. 124–145.

67. He Z., Caratini G., Dormieux L., and Kondo D., Homogenization of anisotropic elastoplastic behaviors of a porous polycrystal with interface effects. International Journal for Numerical and Analytical Methods in Geomechanics, 2013. 37(18): p. 3213–3236.

68. He Z., Dormieux L., and Kondo D., Strength properties of a Drucker-Prager porous medium reinforced by rigid particles. International Journal of Plasticity, 2013. 51: p. 218–240.

69. He Z., Dormieux L., Lemarchand E., and Kondo D., Cohesive Mohr-Coulomb interface effects on the strength criterion of materials with granular-based microstructure. European Journal of Mechanics - A/Solids, 2013. 42: p. 430–440.

70. Hekmati A., Ricot D., and Druault P., Numerical synthesis of aeroacoustic wall pressure fields over a flat plate: Generation, transmission and radiationanalyses. Journal of Sound and Vibration, 2013. 332(13): p. 3163–3176.

71. Hladky-Hennion A. C., Vasseur J. O., Degraeve S., Granger C., and de Billy M., Acoustic wave localization in one-dimensional Fibonacci phononic structures with mirror symmetry. Journal of Applied Physics, 2013. 113(15): p. 154901.

72. Hoepffner J. and Paré G., Recoil of a liquid filament: escape from pinch-off through creation of a vortex ring. Journal of Fluid Mechanics, 2013. 734: p. 183–197.

73. Humbert T., Cadot O., During G., Josserand C., Rica S., and Touze C., Wave turbulence in vibrating plates: The effect of damping. EPL, 2013. 102(3): p. 30002.

74. Hure J. and Audoly B., Capillary buckling of a thin film adhering to a sphere. Journal of the Mechanics and Physics of Solids, 2013. 61(2): p. 450–471.

75. Ikenaga Y., Nishi S., Komagata Y., Saito M., Lagrée P.-Y., Asada T., and Matsukawa M., Experimental Study on the Pressure and Pulse Wave Propagation in Viscoelastic Vessel Tubes-Effects of Liquid Viscosity and Tube Stiffness. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 2013. 60(11): p. 2381–2388.

76. Ismaili N. A., da Silva C. D., El-Kettani M. E.-C., Despaux G., Rousseau M., and Izbicki J.-L., Lamb Modes for the Characterization of Bonded Structures. Acta Acustica United with Acustica, 2013. 99(2): p. 331–334.

77. Issenmann B., Auberon A., Wunenburger R., and Delville J.-P., Acoustical spring effect in a compliant cavity. European Physical Journal E, 2013. 36(4): p. 39.

78. Iurevych O., Gubin S., and Dudeck M., Modelling of a Hybrid Solar Panel with Solar Concentration. Journal of Electrical Engineering Research (EER), 2013. 1(2): p. 35–41.

79. Jibawy A., Desmorat B., and Vincenti A., Structural rigidity optimization of thin laminated shells. Composite Structures, 2013. 95: p. 35–43.

80. Joseph J. S. J., Marty S., Matas J.-P., Zaleski S., and Hoepffner J., Vortices catapult droplets in atomization. Physics of Fluids, 2013. 25(11): p. 112109.

81. Kaminska A., Hoffman J., Szymanski Z., and Dudeck M., Plasmatron for simulation of re-entry conditions in a planetary atmosphere. IEEE Transactions on Dielectrics and Electrical Insulation, 2013. 20(5): p. 1607–1615.

82. Lamharess N., Starck L., Millet C. N., and Da Costa P., Effect of Biofuels on Catalyzed Diesel Particulate Filter Regeneration (Proc. of the 9th International Congress on Catalysis and Automotive Pollution Control, Brussels, 2012). Topics in Catalysis, 2013. 56(1–8): p. 462–466.

83. Lanoye E., Cormery F., Kondo D., and Shao J.F., An isotropic unilateral damage model coupled with frictional sliding for quasi-brittle materials. Mechanics Research Communications, 2013. 53: p. 31–35.

84. Lavergne F., Brenner R., and Sab K., Effects of grain size distribution and stress heterogeneity on yield stress of polycrystals: A numerical approach. Computational Materials Science, 2013. 77: p. 387–398.

85. Leblond J.-B., Amin El Sayed H., and Bergheau J.-M., On the incorporation of surface tension in finite-element calculations. Comptes Rendus Mécanique, 2013. 341(11–12): p. 770–775.

86. Leblond J.-B., Pignol M., and Huin D., Predicting the transition from internal to external oxidation of alloys using an extended Wagner model. Comptes Rendus Mécanique, 2013. 341(3): p. 314–322.

87. Leguillon D., A simple model of thermal crack pattern formation using the coupled criterion. Comptes Rendus Mécanique, 2013. 341(6): p. 538–546.

88. Leguillon D., Karnaeva E., Baroni A., and Putot C., Tight sedimentary covers for CO2 sequestration. International Journal of Fracture, 2013. 184(1–2): p. 113–122.

89. Leguillon D. and Martin E., The strengthening effect caused by an elastic contrast-part I: the bimaterial case. International Journal of Fracture, 2013. 179(1–2): p. 157–167.

90. Leguillon D. and Martin E., The strengthening effect caused by an elastic contrast-part II: stratification by a thin stiff layer. International Journal of Fracture, 2013. 179(1–2): p. 169–178.

91. Leon Baldelli A. A., Bourdin B., Marigo J.-J., and Maurini C., Fracture and debonding of a thin film on a stiff substrate: analytical and numerical solutions of a one-dimensional variational model. Continuum Mechanics and Thermodynamics, 2013. 25(2–4): p. 243–268.

92. Levasseur S., Collin F., Charlier R., and Kondo D., On micromechanical damage modeling in geomechanics: Influence of numerical integration scheme. Journal of Computational and Applied Mathematics, 2013. 246: p. 215–224.

93. Levasseur S., Collin F., Charlier R., and Kondo D., A micro–macro approach of permeability evolution in rocks excavation damaged zones. Computers and Geotechnics, 2013. 49: p. 245–252.

94. Lhuillier D., Chang C.-H., and Theofanous T. G., On the quest for a hyperbolic effective-field model of disperse flows. Journal of Fluid Mechanics, 2013. 731: p. 184–194.

95. Madou K. and Leblond J.-B., Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids - I: Yield surfaces of representative cells. European Journal of Mechanics - A/Solids, 2013. 42: p. 480–489.

96. Madou K., Leblond J.-B., and Morin L., Numerical studies of porous ductile materials containing arbitrary ellipsoidal voids - II: Evolution of the length and orientation of the void axes. European Journal of Mechanics - A/Solids, 2013. 42: p. 490–507.

97. Marié S., Druault P., Lambaré H., and Schrijer F., Experimental analysis of the pressure-velocity correlations of external unsteady flow over rocket launchers. Aerospace Science and Technology, 2013. 30(1): p. 83–93.

98. Mason P. and Josserand C., Phase-jump nucleation in a one-dimensional model of a supersolid. Physical Review B, 2013. 88(22): p. 224506.

99. Maugin G. A., The principle of virtual power: from eliminating metaphysical forces to providing an efficient modelling tool – In memory of Paul Germain (1920–2009). Continuum Mechanics and Thermodynamics, 2013. 25(2–4): p. 127–146.

100. Maugin G. A., A.A. Ilyushin's works: an appraisal from Paris. Journal of Engineering Mathematics, 2013. 78(1, SI): p. 3–8.

101. Maugin G. A., Sixty years of configurational mechanics (1950-2010). Mechanics Research Communications, 2013. 50: p. 39–49.

102. Maugin G. A. and Rousseau M., Prolegomena to studies on dynamic materials and their space-time homogenization. Discrete and Continuous Dynamical Systems, Series S, 2013. 6(6): p. 1599–1608.

103. Maurini C., Bourdin B., Gauthier G., and Lazarus V., Crack patterns obtained by unidirectional drying of a colloidal suspension in a capillary tube: experiments and numerical simulations using a two-dimensional variational approach. International Journal of Fracture, 2013. 184(1–2): p. 75–91.

104. Meldi M. and Sagaut P., Pressure statistics in self-similar freely decaying isotropic turbulence. Journal of Fluid Mechanics, 2013. 717: p. R2.

105. Meldi M. and Sagaut P., Further insights into self-similarity and self-preservation in freely decaying isotropic turbulence. Journal of Turbulence, 2013. 14(8): p. 24–53.

106. Meldi M., Vergnault E., and Sagaut P., An Arbitrary Lagrangian-Eulerian approach for the simulation of immersed moving solids with Lattice Boltzmann Method. Journal of Computational Physics, 2013. 235: p. 182–198.

107. Merabet I. and Sanchez-Palencia E., On sensitive elliptic singular perturbation problems and logarithmic oscillations: the case of shells with edges. Mathematical Methods in the Applied Sciences, 2013. 36(4): p. 462–477.

108. Michelitsch T. M., Maugin G. A., Nowakowski A. F., Nicolleau F. C. G. A., and Rahman M., The fractional Laplacian as a limiting case of a self-similar spring model and applications to n-dimensional anomalous diffusion. Fractional Calculus and Applied Analysis, 2013. 16(4): p. 827–859.

109. Mignot R., Daudet L., and Ollivier F., Room Reverberation Reconstruction: Interpolation of the Early Part Using Compressed Sensing. IEEE Transactions on Audio Speech and Language Processing, 2013. 21(11): p. 2301–2312.

110. Miquel B., Alexakis A., Josserand C., and Mordant N., Transition from wave turbulence to dynamical crumpling in vibrated elastic plates. Physical Review Letters, 2013. 111(5): p. 054302.

111. Monchiet V., Charkaluk E., and Kondo D., Macroscopic yield criteria for ductile materials containing spheroidal voids: an Eshelby-like velocity fields approach. Mechanics of Materials, 2013(Available online 29 May 2013, DOI: 10.1016/j.mechmat.2013.05.006).

112. Monchiet V. and Kondo D., Combined voids size and shape effects on the macroscopic criterion of ductile nanoporous materials. International Journal of Plasticity, 2013. 43: p. 20–41.

113. Montemurro M., Vincenti A., and Vannucci P., The Automatic Dynamic Penalisation method (ADP) for handling constraints with genetic algorithms. Computer Methods in Applied Mechanics and Engineering, 2013. 256: p. 70–87.

114. Moradi A., Carrère N., Leguillon D., Martin E., and Cognard J.-Y., Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: Effect of material and geometrical parameters. International Journal of Adhesion and Adhesives, 2013. 47(SI): p. 73–82.

115. Moradi A., Leguillon D., and Carrere N., Influence of the adhesive thickness on a debonding - An asymptotic model. Engineering Fracture Mechanics, 2013. 114: p. 55–68.

116. Morin Caroline, Sedran T., de Larrard F., Dumontet H., Murgier S., Hardy M., and Dano C., Prediction of the volume of concrete backfill materials excavated using a pick. European Journal of Environmental and Civil Engineering, 2013. 17(10): p. 935–955.

117. Nadot-Martin C., Halm D., Dartois S., Touboul M., Dragon A., and Fanget A., Direct multiscale ‘morphological approach’ for non-linear highly-filled particulate composites: theory and applications. International Journal of Materials and Structural Integrity, 2013. 7(1/2/3): p. 109–130.

118. Neukirch S., Antkowiak A., and Marigo J.-J., The bending of an elastic beam by a liquid drop: a variational approach. Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences, 2013. 469(2157): p. 20130066.

119. Nguyen X.-L., Rakotonanahary D., Chaskalovic J., and Fleury B., Insomnia related to sleep apnoea: effect of long-term auto-adjusting positive airway pressure treatment. European Respiratory Journal, 2013. 41(3): p. 593–600.

120. Otto T., Rossi M., and Boeck T., Viscous instability of a sheared liquid-gas interface: Dependence on fluid properties and basic velocity profile. Physics of Fluids, 2013. 25(3): p. 032103.

121. Pastor F. and Kondo D., Assessment of hollow spheroid models for ductile failure prediction by Limit Analysis and conic programming. European Journal of Mechanics - A/Solids, 2013. 38: p. 100–114.

122. Pastor F., Kondo D., and Pastor J., Limit Analysis and computational modeling of the hollow sphere model with a Mises–Schleicher matrix. International Journal of Engineering Science, 2013. 66–67: p. 60–73.

123. Pastor F., Kondo D., and Pastor J., 3D-FEM formulations of limit analysis methods for porous pressure-sensitive materials. International Journal for Numerical Methods in Engineering, 2013. 95(10): p. 847–870.

124. Pham K. and Marigo J.-J., Stability of Homogeneous States with Gradient Damage Models: Size Effects and Shape Effects in the Three-Dimensional Setting. Journal of Elasticity, 2013. 110(1): p. 63–93.

125. Ponson L., Cao Y., Bouchaud E., Tvergaard V., and Needleman A., Statistics of ductile fracture surfaces: the effect of material parameters. International Journal of Fracture, 2013. 184(1–2): p. 137–149.

126. Protière S., Duprat C., and Stone H. A., Wetting on two parallel fibers: drop to column transitions. Soft Matter, 2013. 9(1): p. 271–276.

127. Radlik M., Adamowska M., Laamacz A., Krzton A., Da Costa P., and Turek W., Study of the surface evolution of nitrogen species on CuO/CeZrO2 catalysts. Reaction Kinetics Mechanisms and Catalysis, 2013. 109(1): p. 43–56.

128. Rankovic N., Chizallet C., Nicolle A., Berthout D., and Da Costa P., Sulfur Deactivation of NOx Storage Catalysts: A Multiscale Modeling Approach. Oil & Gas Science and Technology-Revue d IFP Energies Nouvelles, 2013. 68(6): p. 995–1005.

129. Rankovic N., Chizallet C., Nicolle A., and Da Costa P., Multiscale Modeling of Barium Sulfate Formation from BaO. Industrial & Engineering Chemistry Research, 2013. 52(26): p. 9086–9098.

130. Rankovic N., Nicolle A., Berthout D., and Da Costa P., Multi-Scale Modeling Study of Barium Nitrate Reduction in NOx Traps (Proc. of the 9th International Congress on Catalysis and Automotive Pollution Control, Brussels, 2012). Topics in Catalysis, 2013. 56(1–8): p. 140–144.

131. Righini L., Castoldi L., Lietti L., Sauce S., Da Costa P., and Forzatti P., Mechanism of the Reduction by Ammonia of Nitrates Stored onto a Pt-Ba/Al2O3 LNT Catalyst. Topics in Catalysis, 2013. 56(18–20): p. 1906–1915.

132. Rivetti M., Non-symmetric localized fold of a floating sheet. Comptes Rendus Mécanique, 2013. 341(3): p. 333–338.

133. Rivetti M. and Antkowiak A., Elasto-capillary meniscus: pulling out a soft strip sticking to a liquid surface. Soft Matter, 2013. 9(27): p. 6226–6234.

134. Rosi G., Paccapeli R., Ollivier F., and Pouget J., Optimization of piezoelectric patches positioning for passive sound radiation control of plates. Journal of Vibration and Control, 2013. 19(5): p. 658–673.

135. Rousseau M. and Maugin G. A., Wave momentum in models of generalized continua. Wave Motion, 2013. 50(3): p. 509–519.

136. Rousseau M. and Maugin G. A., Reprint of: Wave momentum in models of generalized continua. Wave Motion, 2013. 50(8): p. 1251–1261.

137. Ruas V., Hermite finite elements for second order boundary value problems with sharp gradient discontinuities. Journal of Computational and Applied Mathematics, 2013. 246: p. 234–242.

138. Ruas V., Brandão D., and Kischinhevsky M., Hermite finite elements for diffusion phenomena. Journal of Computational Physics, 2013. 235: p. 542–564.

139. Ruas V., Leal Toledo R. C. P., and Kischinhevsky M., Finite Elements in mixed least-squares formulation for simulating transient convection-diffusion. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 2013. 29(1): p. 21–28.

140. Sanchez-Palencia E. and Francoise J.-P., Structural instability and emergence of the biodiversity. Acta Biotheoretica, 2013. 61(3): p. 397–412.

141. Seffen K. A. and Maurini C., Growth and shape control of disks by bending and extension. Journal of the Mechanics and Physics of Solids, 2013. 61(1): p. 190–204.

142. Sepulveda N., Petitjean L., Cochet O., Grasland-Mongrain E., Silberzan P., and Hakim V., Collective cell motion in an epithelial sheet can be quantitatively described by a stochastic interacting particle model. PLoS Computational Biology, 2013. 9(3): p. e1002944.

143. Shen W. Q., Kondo D., Dormieux L., and Shao J. F., A closed-form three scale model for ductile rocks with a plastically compressible porous matrix. Mechanics of Materials, 2013. 59: p. 73–86.

144. Shim J. W. and Gatignol R., How to obtain higher-order multivariate Hermite expansion of Maxwell-Boltzmann distribution by using Taylor expansion. Zeitschrift fur Angewandte Mathematik und Physik, 2013. 64(3): p. 473–482.

145. Sixto-Camacho L. M., Bravo-Castillero J., Brenner R., Guinovart-Diaz R., Mechkour H., Rodriguez-Ramos R., and Sabina F. J., Asymptotic homogenization of periodic thermo-magneto-electro-elastic heterogeneous media. Computers & Mathematics with Applications, 2013. 66(10): p. 2056–2074.

146. Staron L., Lagrée P.-Y., Ray P., and Popinet S., Scaling laws for the slumping of a Bingham plastic fluid. Journal of Rheology, 2013. 57(4): p. 1265–1280.

147. Terrien S., Vergez C., and Fabre B., Flute-like musical instruments: A toy model investigated through numerical continuation. Journal of Sound and Vibration, 2013. 332(15): p. 3833–3848.

148. Vacher D., Menecier S., Dudeck M., Dubois M., Devouard B., and Petit E., Solid Carbon Produced in an Inductively Coupled Plasma Torch with a Titan Like Atmosphere. International Journal of Aerospace Engineering, 2013. 2013: p. 546385.

149. Valiere J.-C., Palazzo-Bertholon B., Polack J.-D., and Carvalho P., Acoustic Pots in Ancient and Medieval Buildings: Literary Analysis of Ancient Texts and Comparison with Recent Observations in French Churches. Acta Acustica united with Acustica, 2013. 99(1): p. 70–81.

150. Vasoya M., Leblond J.-B., and Ponson L., A geometrically nonlinear analysis of coplanar crack propagation in some heterogeneous medium. International Journal of Solids and Structures, 2013. 50(2): p. 371–378.

151. Vergnault E., Malaspinas O., and Sagaut P., Noise source identification with the lattice Boltzmann method. Journal of the Acoustical Society of America, 2013. 133(3): p. 1293–1305.

152. Vidoli S., Discrete approximations of the Föppl-Von Kármán shell model: from coarse to more refined models. International Journal of Solids and Structures, 2013. 50(9): p. 1241–1252.

153. Vincenti A., Vannucci P., and Ahmadian M. R., Optimization of laminated composites by using genetic algorithm and the polar description of plane anisotropy. Mechanics of Advanced Materials and Structures, 2013. 20(3): p. 242–255.

154. Wanga X.-F., Fullana J.-M., Lagrée P.-Y., and Armentano R. L., Effect of viscoelasticity of arterial wall on pulse wave: a comparative study on ovine (Proc. of the 38th Congress of the Societe-de-Biomecanique (SB), Marseille, 2013). Computer Methods in Biomechanics and Biomedical Engineering, 2013. 16 Suppl 1: p. 25–26.

155. Xia S. M., Ponson L., Ravichandran G., and Bhattacharya K., Adhesion of heterogeneous thin films: I. elastic heterogeneity. Journal of the Mechanics and Physics of Solids, 2013. 61(3): p. 838–851.

156. Xu H. and He Y., Some iterative finite element methods for steady Navier-Stokes equations with different viscosities. Journal of Computational Physics, 2013. 232(1): p. 136–152.

157. Xu H. and Sagaut P., Analysis of the absorbing layers for the weakly-compressible lattice Boltzmann methods. Journal of Computational Physics, 2013. 245: p. 14–42.